Are you looking for how to clean a hairbrush easily and quickly? If yes, stay tuned with us because here I will teach you 8 hacks for How to clean a Hairbrush its 2023, and people are keen to maintain hygiene, lets start keeping in mind that your Hair brush is disgusting and old.
Why Do You Need to Clean Your Hair Brush?
The manufacturing of a hairbrush is like that. It can work as a sponge, so it only depends on how often you have used it. So, it means all kinds of residue get trapped inside the bristles of your hair as well as from your surroundings. The hairbrush catches dust, dirt from the environment and hairs, dandruff, and oil from your head.
Despite this, you also use some hair-care items such as hair sprays, gels, and conditioner that may accumulate on your hair and adhere to the brush’s bristles. And every time you use your hairbrush, the dead skin cells in it may get back into your hair. When you start brushing, your hairs shed, and they also gather at the base of the brush.
As time passes, when you are not cleaning the brush, all the dust, grime, and soot may also settle down at the base of the brush. And when the bristles are oily due to some oil or sticky hair products, these particles easily stick to the hairbrush.
It is clear that every time you use the brush without consistent cleaning, all these residues may get into your head and make it dirty. A filthy hairbrush could find it tougher to complete its task and make your hair appear its finest.
So, all you need to do is clean your brush on a regular basis. And if it is not possible, then pull all the hairs out from your fingers daily and use the below-mentioned hacks after every two to three weeks to deep clean your hairbrush.
Also Read:
How To Clean a Hairbrush
Eight Hacks to Clean a Hairbrush at Home
Here are the eight best ways to squeaky clean the hairbrush at home:
- Hack # 1: ( Use Pen, Scissors, Toothbrushes, Warm water, and shampoo)
- Hack # 2: (Use Vinegar, Shampoo, and warm water)
- Hack # 3: (Use Hair Comb, Shampoo, and Scrub brush)
- Hack # 4: (Use Baking Soda and Apple Cider Vinegar)
- Hack # 5: (Use Isopropyl and shampoo)
- Hack # 6: (Use Clarifying shampoo and baking soda)
- Hack # 7: (Use Pure-Castile Liquid Soap, Peppermint, and water)
- Hack # 8: (Use Castile Soap)
Hack # 1:(Use Pen, Scissors, Toothbrushes, Warm water, and shampoo)
A hairbrush can get pretty nasty. Luckily, it is pretty easy to clean Here is what you need to do:
Things you Need:
You need five things for this purpose.
- Pen
- Scissors
- Toothbrushes
- Warm water and shampoo
Steps to follow
- Run a pen along the hairbrush’s center.
- Cut the hair in half using a pair of scissors.
- Take the hairs out.
- Now you need to mix shampoo into the warm water.
- Use the toothbrush to clean the hairbrush.
- This process takes a little while, and then it dries.
Hack # 2: (Use Vinegar, Shampoo, and warm water)
Things you Need:
- Old Toothbrush
- Shampoo and warm water
- Vinegar
Steps to follow
- Remove hair from the hairbrush properly by using your hands.
- Then, take an old or worn-out toothbrush and run in it to clean it until the dirt is removed.
- Now take warm water, add some shampoo, and mix it well.
- Then, add some vinegar and mix the whole solution again.
- Now, dip your hairbrush for upto 5 to 10 minutes in the solution. You can also put your other hair combs into that solution.
- Now again, run that old toothbrush into the hairbrush.
- Rinse with water and see squeaky clean results.
Hack # 3: (Use Hair Comb, Shampoo, and Scrub brush)
Things You Need
- Hair comb
- Sink
- Shampoo
- Scrub brush
Follow The Following Steps
- Take a start by pulling out as much hair as you can with your hands; for this purpose, you can also use a hair comb.
- After that, plug your sink or fill up a bowl with hot water. You want enough water to cover your hairbrush.
- Now, shake your brush into the water.
- Once your sink is full of water, add shampoo to your hairbrush and ensure everything mixes up completely.
- Leave your brush dipped in the water for about 30 minutes.
- Do not soak your hairbrush in water if it has a wooden handle because this can warp the wood of the brush, and you have to buy a new hairbrush.
- Now, hear your hairbrush after soaking it for 30 minutes, and you will see the water looks gross compared to earlier.
- Now, take a scrub brush to run in the hairbrush, or use your fingers to make it squeaky clean. It will eliminate any gross stuff that did not come off while soaking.
- Hair products and oil build up in your hairbrush over time and get in your hand every time you brush it, which is why the water is murky, and you will put that greasy gross oil back into your hair every single time you brush it.
- Drain the sink and give your hair a good rinse before you start filling it up again.
- Once filled, you can use this just fully to rinse off your hairbrush. So you will not get any gunk in your hair the next time you use it.
- At this point, make sure to give your handle a quick wipe and scrub too.
13, you will see it will be much cleaner than it was already. Just wrap it in the towel and let it dry overnight.
- At the next day, you will see your hairbrush will look so much better
Hack #4: (Use Baking Soda and Apple Cider Vinegar)
Things You Need:
- Rat tail comb
- Warm water
- Baking soda
- Apple cider vinegar
Follow the following Steps
- Use a rat tail comb that goes down each column separating the hair from the base of the brush. It is where most people stop, but all that builds is garbage and is not eating healthy hair.
- So, let’s clean by using warm water. You want to create a stripping wash. You can use baking soda. Add one tablespoon of baking soda and one tablespoon of apple cider vinegar.
- take a toothbrush that you will never use in your mouth. Scrub each column and row; you will see all the dirt build up when you pull that brush up.
- It will be a pretty gross squeeze off any trapped water out of the brush, and then tap it on the towel and lay that bush down at night for 24 hours to dry properly, and there you have a good new hair brush.
Hack #5: (Use Isopropyl and shampoo)
The thing you Need:
- Isopropyl alcohol
- Shampoo
- Hot water
- Sink
Follow the Following steps
- When cleaning your brushes, the first step is to remove the hair. Use a hair pick to gently lift the hair before removing it.
- Spray the brush with 70% isopropyl alcohol. Isopropyl alcohol comes in two concentrations: 70% or 99%. 70% lower is better at killing bacteria and pathogens because it dissolves slower.
- Then set the brushes aside for a few minutes and draw a hot water bath bomb in your sink.
- Use clarifying shampoo to make it soapy, and let it soak for five minutes for rinsing and air drying. Disinfecting and washing your hair brushes is beneficial for your hair and scalp.
- Hair brushes pick up the dander oil hair products from your stands which, if not cleaned off, can be deposited right back onto your hair.
- So, do this a few times a year; honestly, you will feel nothing better than a clean hairbrush.
Hack # 6: (Use Clarifying shampoo and baking soda)
Things you Need:
- Boil water
- Clarifying shampoo
- Baking soda
Follow the Following Steps
- If you are using a dirty brush on your hair, you may find that your roots are becoming more oily and greasy faster. You need to strip your brushes of all the built-up hair.
- Start with boiling water. When water becomes hot, pour it into a container.
- Add clarifying shampoo to the water. Then add a couple of spoons of baking soda. Now mix the solution well.
- After that, pop in your brush face down. Ensure you submerge your brush and push it down into the water.
- You can add a few more brushes and combs to the solution.
- After that, take brushes and combs out of the water and let them dry all night.
Hack # 7: (Use Pure-Castile Liquid Soap, Peppermint, and water)
Things you Need:
- Tail comb
- Bowl
- Water
- Pure-Castile Liquid Soap Peppermint
Follow the Following Steps
- Take a tail comb to remove hair.
- Once the hair is completely removed, take some water in the bowl.
- Now add Pure-Castile Liquid Soap Peppermint into the water, mix the solution, and put your hairbrush inside the bowl.
- After a few minutes, remove the brush from the solution and scrub it with the help of an old toothbrush.
- Hence you will have a squeaky clean hairbrush that looks new.
Hack # 8: (Use Castile Soap)
Things you Need:
- Pointy end hair comb
- Bowl
- Water
- Castile Soap
Follow the following steps
- You need a pointy end comb. If you don’t have it, a pen cap with a pointy end will also work.
- Go in between the bristles and pick out all the hair. Use your finger to make it squeaky clean.
- Put the brushes in a bowl with some castile soap.
- Fill the bowl with hot water.
- Leave them in the water for 2-3 min.
- Refill with water, no soap.
- Take them out after rinsing.
Frequently Asked Questions (FAQ’s)
Q: How often do I need to clean my hairbrush?
Answer: It is unnecessary to clean your hairbrush deeply every day, and if you have enough time, it will be a good thing. However, it is important every time you use a hairbrush, you have to pull all of the hairs out of the brush from your fingers or by using a tail comb, and after two to three weeks, you need to clean your brush properly.
However, if you are using some hair-care products such as gels, hair-styling creams, conditioners, or hair sprays, then you must clean your hairbrush after every week. This way, your hair will be protected from all sorts of residue to stick into your hair.
Q: What happens if you don’t clean your hairbrush?
Answer: When you don’t clean your hairbrushes, then every kind of residue, which includes dust, grime, soot, and dead skin cells, may get transferred from your hairbrush into your hair’s back. It may lead to the risk of infection in your scalp. As a result, your scalp will have a lot of dryness and itching. Despite this, your hair may get greased quickly. Additionally, your brush will not work the same as it was before.
Q: How do you know if you need a new hairbrush?
Answer: When you see the bristles of your brush start bending, and some of them have broken, like you feel something is missing in your hairbrush, you need to change your brush. Furthermore, if the handle of the brush has been broken, you will need a new one. So, in these cases, you should buy a new good-quality brush.
Q: How long does a hairbrush last?
Answer: It is a general rule of thumb that you need to buy a new hairbrush after six months. Well, it depends upon the quality of the hairbrush and how much you keep it with care. The more you keep it with care, the more it will last. Avoid giving it in your kid’s hand for playing, and clean it after using it so it may last longer.
Q: Does a dirty hairbrush cause dandruff?
Answer: You made a big mistake, a loss of your hair when you use a dirty and worn-out hairbrush. In addition, it can result in additional split ends, but the filth and gunk can adhere to the hair, irritate your scalp, and make you more susceptible to dandruff.
Final Verdict
In this article, we have discussed the eight best hacks for cleaning your brushes. I have also discussed why you need to clean your hairbrushes. As you have studied, it is very important to clean your hairbrushes because they lead to the risk of dandruff, infection, itching, dryness in the scalp, and many more problems, so you need to clean your brush every time you brush your hair and deep clean it after every two weeks.
I hope you like this information and consider these hacks useful. Still, if you need clarification about cleaning your hairbrush, just let us know in the comments section.
And that was all about how to clean a hair brush.
Also Read:
